- Overview
- Product Description
- Product Parameters
- Product Features
- Storage
Basic Info.
Product Description
E glass Non Alkali Fiberglass Tape is made of high performance E-glass fiberglass yarn which is non alkali glass fiber, with weaving styles of plain, twill and single jacquard. It has the advantages of high-temperature resistance, electric insulation,heat insulation, corrosion resistance, etc. Also we call it non alkali glass fiber tape, fiberg
lass insulation tape. It is the perfect filling and wrapping material for transformer, electric motor, electrical appliance, wrapping pipe with epoxy resin, cable as well as framework material for FRP products.
The normal width is 8mm to 150mm, with thickness 0.10mm to 0.7mm. The roll sizes (roll wide, roll length) can be produced according to customer requirements.
| Item | Density | Warp | Weft | Thickness(mm) | Weight(g/sq.m) | the length of one roll(m) |
| T110 | 18X7.2 | EC9-33*1Z40 | EC9-33*1Z40 | 0.11 | 110 | 800 |
| T130 | 14X6.9 | EC8-24*2S110 | EC8-24*2S110 | 0.13 | 130 | 600 |
| T140 | 13X10 | EC9-33*2Z40 | EC9-33*2Z40 | 0.14 | 140 | 550 |
| T150 | 16X7.2 | EC9-33*2Z40 | EC9-33*2Z40 | 0.15 | 150 | 550 |
| T160 | 14X5.4 | EC9-33*2Z40 | EC9-33*2Z40 | 0.16 | 160 | 500 |
| T170 | 14X7 | EC9-33*2Z40 | EC9-33*2Z40 | 0.17 | 170 | 450 |
| T180 | 16X7.9 | EC9-33*2Z40 | EC9-33*2Z40 | 0.18 | 180 | 400 |
| T200 | 8X7 | EC9-33*2Z40 | EC9-33*2Z40 | 0.2 | 200 | 350 |
| T240 | 20X7.2 | EC8-24*2S110 | EC8-24*2S110 | 0.24 | 240 | 300 |
| T270 | 13X6.4 | EC9-33*2Z40 | EC9-33*2Z40 | 0.27 | 270 | 250 |
| T300 | 12X5.5 | EC9-33*2Z40 | EC9-33*2Z40 | 0.3 | 300 | 200 |
| T500 | 12X6.4 | EC9-33*2Z40 | EC9-33*2Z40 | 0.5 | 500 | 150 |
Fiberglass tape is usually a narrow, cloth strip with woven edges that prevent unraveling. Use this tape for reinforcing seams and corners, and over epoxy fillets on plywood stitch and glue boats.
Thickness: 0.10mm till 0.70mm / 0.8mm to 3mm (texturized fiberglass tapes)
Width: 8mm till 150mm
1. Good thermal resistance
2. Nice corrosion resistance
3. Best mechnical trength
4. Fast wet out with resin
Orthopaedic Fiberglass Casting Tape is knitted by a warp knitting machine using alkali free glass fiber yarn, and treated by our self-developed high-temperature heat treatment.It is without burrs, frying, and good shaping effect compatible with polyurethane resin , wear resistance, easy to cut, low heat generation, good air permeability, X-ray perspective and long storage time, etc.
| Product name | Knitted Fiberglas Fabric | ||||
| Item | Standard | Test Result | Conclusion | ||
| Appearance | No defect ,burr free | No defect ,burr free | ok | ||
| Incision | burr free | burr free | ok | ||
| Thickness (mm) | 0.55-0.65 | 0.58 | ok | ||
| Elongation at break<%) | ≥10 | 17 | ok | ||
| Tensile at break (n/25mm ) | ≥55 | 60 | ok | ||
| Density | Warp Rings/ 10cm | 58 | 58 | ok | |
| Weft ends/10mm | 3.75 | 3.75 | |||
| Spec | Index | Test Result | ok | ||
| Width (mm) | 2 Inch | 50+5/- I | ok | ||
| 3 Inch | 75+5/-2 | ok | |||
| 4 Inch | 106+5/-2 | ok | |||
| 5 Inch | 125+5/-3 | 125 | ok | ||
| 6 Inch | 150+5/-3 | ok | |||
| Weight(g/m) | 2 Inch | 14±3% | ok | ||
| 3 Inch | 21±3% | ok | |||
| 4 1nch | 28±3% | ok | |||
| 5 Inch | 35±3% | 35 | ok | ||
| 6 Inch | 42±3% | ok | |||
The knitting fiberglass fabric is woven by warp knitting Karl-Mayer machine imported from Germany. The finished-product width 0.96m, area weight 360g/m2. It can be stretched in both direction and the mesh size is same. This is as the base fabric of food grade silicone mould and pie mould. We also produce knitting tape, width 2",3",4",5",6", fixed length. This is the raw material of high polymer medical bandage and water blocking tape.
Unless otherwise specified, the fiberglass products should be in dry, cool and moisture-proof area. The room temperature and humidity should be always maintained at 15ºC~35ºC and 35%~65%. It is best if the product is used within 12 months after production date. The fiberglass products should remain in their original packaging until just prior to user.
FAQs
1. What is your terms of packing?
Generally, we pack our goods in carton with pallet
2. What is your tems of payment?
T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
3. What is your terms of delivery?
EXW, FOB, CFR, CIF,L/C at sight
4. How about your delivery time?
Generally, it will take 21 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
5. Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
6. What is your sample policy?
We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Yes, we have 100% test before delivery
Contact us, we will use the professional knowledge serve you!
Wish we can create the great future together!